Network Technologies ST-C5KVM2ARS-1000S User Manual download pdf (Page 19)

NTI XTENDEX Extenders

INTERCONNECTION CABLE WIRING METHOD

The connection cable between the remote and local is terminated with RJ45 connectors and must be wired according to the

EIA/TIA 568 B industry standard. Wiring is per the table and drawing below.

Pin Wire Color Pair Function

1 White/Orange 2 T

2 Orange 2 R

3 White/Green 3 T

4 Blue 1 R

5 White/Blue 1 T

6 Green 3 R

7 White/Brown 4 T

8 Brown 4 R

Figure 11- View looking into RJ45 female

TROUBLESHOOTING

Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications. We

make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this

product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise. If the

answer is not found in the chart, please check the FAQs (Frequently Asked Questions) at our website at

http://www.networktechinc.com or contact us directly for help at 800-742-8324 (800-RGB-TECH) in US & Canada or 330-562-

7070 worldwide. We will be happy to assist in any way we can.

Problem Cause Solution

Remote or Local Unit

green power LED does not

illuminate

• Power supply is not connected or

plugged-in.

• Make sure outlet is live and AC adapter is plugged-in.

(one for the Remote and one for the Local)

• Make sure 9VDC jack is fully connected

No Video on monitor

• One or more video cables is loose

or disconnected.

• No power to Remote or Local

Units.

• Video Cable was not attached

when CPU was booted.

• CAT5 cable is not connected.

• Check all video cable connections

• Make sure green LEDs are illuminated for local and

remote. If not, see solutions for problem above.

• With all the cables properly connected, reboot the CPU.

• Check cable connections. Make sure they are snapped-

in properly and completely and reboot.

Video Picture is not sharp

or is smeared

• All Video Cables are not firmly

seated.

• CAT5 cable is too long.

• The CAT5 cable is not properly

connected.

• Video not adjusted

• Check all connections. Make sure all cables are fully

seated.

• Verify length is within specified limits-1000'.

• Check cable connections. Make sure they are snapped-

in properly and completely.

• Check cable connections and power cycle. See page 12

for video quality adjustment instruction.

Pair 2 Pair 1

Pair 4

Pair 3

1 2 ... 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Network Technologies ST-C5KVM2ARS-1000S User Manual Page 19

Comments to this Manuals

Related products and manuals for Console extenders Network Technologies ST-C5KVM2ARS-1000S